Realacc Genius 215 4mm Frame + REVO F4 + 4X Racerstar BR2205S 2600KV Motor + 4X RS30A V2 Blheli_S ESC + 10 Pairs 5051 3 Blade Propeller
Items Specifications Features Realacc Genius 215 FPV Racing Frame
Wheelbase: 215mm
Material: 3K carbon fiber
Frame arm: 4mm
Top plate: 2mm
Frame arm top plywood plate: 2mm
Side plate: 1.5mm
Bottom plate: 1.5mm
Weight: 85g(frame + hardware)
Full 3K Carbon Fiber airframe with removable 4mm arms.
2mm top and bottom plates
Compact size for 5" propellers, 215mm motor to motor.
LiPo battery protection plate included.
Designed around popular 26mm sized cams such as the HS1177.
Lightweight and rigid
RPM/V: 2600KV
Height: 33mm
Width: 27.9mm
Shaft diameter: M5
Motor mount hole size: M3
Weight: 29 grams
Voltage: 2-4S
Battery: 2-4S lipo battery
Internal resistance: â¦
Long life Japanese NMB ball bearings
Efficient Japanese Kawasaki stator steel
N40SH magnetic steel stable up to 180°
Oxygen free copper wire
7075-T10 7050 aviation aluminum-alloy material
CNC machined aluminum case
Silicone wire leads
Patented balance techniques
Unique wiring method
Racerstar RS30A V2 30A Blheli_S ESC
Upgrade propeller base
Anti-skidding screw thread to prevent propellers from skidding.
5mm stainless hollow shaft
Imported NMB high end mute bearing
99.99% Oxygen free copper wire, high effciency assurance.
Prevent falling technology
Integrated stainless steel shaft
CNC processing technic
Factory 100% dynamic balancing treatment
Item Name:New Beheli_S 30A ESC
Model: RS30A V2
Input Voltage: 2-4S
Con.Current:30A
Peak Current(10s):35A
BEC:NO
Programming :YES
Net Weight: 6.26g
Size:28*13mm
Chips on EFM8BB21F16, 48MHZ Greatest .
BLHeli_S is designed for superior performance in multirotors
Small size combined with light weight for easy installation.
The code supports regular 1-2ms pulse width input,
as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
The input signal is automatically detected by the ESC upon power up.
All codes use damped light mode.
The code supports features to prevent sync loss.
excellently in normal operating environments
CC3D REVO F4 STM32F405 Flight Controller
New generation F4 hardware flight controller for FPV race, STM32F405 MCU ,
Frequency up to 168Mhz ,Flight controller firmware is pushing flight controllers to the limit.
Fast loop times enable sophisticated filtering to deliver the locked in, flying on rails feeling.
Betaflight easily delivers 125us (or faster) loop times on the F4 flight controller
Buzzer Port and LED strip Port
MPU6000 SPI Bus
128Mb Flash(16M Byte)
128Mb Flash(16M Byte)
SBUS/PPM input (Pinheaders)
DSM/DSM2/DSMX input(Plug)
6PWM output (Pinheaders)
Only 36x36mm, mount holes 30.5x30.5mm
All through hole pin header Design -no Sh connectors
STM32 F405 MCU, Runs Raceflight CC3D REVO firmware
Works Perfect with Raceflight - preloaded with Raceflight or BetaFlight 3.0
direct Lipo input :1.5A Built-in onboard regulator - NO BEC needed.
Connect direct to a Lipo to power the board and Rx
RaceFlight or Betaflight support on an STM32 F3 with a SPI based MPU6000
gyro - low noise gyro will not force one to soft-mount the fc
All through hole pin header Design -no Sh connectors
STM32 F405 MCU, Runs Raceflight CC3D REVO firmware
Works Perfect with Raceflight - preloaded with Raceflight or BetaFlight 3.0
direct Lipo input :1.5A Built-in onboard regulator - NO BEC needed.
Connect direct to a Lipo to power the board and Rx
RaceFlight or Betaflight support on an STM32 F3 with a SPI based MPU6000
gyro - low noise gyro will not force one to soft-mount the fc
Material: PC
Color: Red
Quantity: 10 pairs (the same color)
Mounting hole: 5mm
Package included:
1 x Realacc Genius 215 FPV Racing Frame
1 x PDB 5V & 12V
1 x CC3D REVO F4 STM32F405 Flight Controller
2 x BR2205S 2600KV Brushless Motor CW
2 x BR2205S 2600KV Brushless Motor CCW1 x CC3D REVO F4 STM32F405 Flight Controller
2 x BR2205S 2600KV Brushless Motor CW
4 x Racerstar RS30A V2 30A ESC
10 x Racerstar 5051 3 Blade Propeller CW
10 x Racerstar 5051 3 Blade Propeller CCW
Advertising