OPENLOG RTF Flight Controller Flight Data Recorder Support Cleanfligth
Description:
Input voltage:5V
TTL signal working voltage" 3.3V-5.5V
Woking current: thse stand by 2mA, maximum 6mA
Support micro SD FAT16/32 maximum 16GB
Only need to connect the 3 lines can work on RX-I VCC, GND
Support for baud rate range: 2400-115200bps
Suopport the use of serial command configuration
Support TF card on the config.txt to modify the configuration editor
The on board 6pin 2.54 pingout
The on board 4pin 1.25 easy to connect gps device
Feature:
1. Compatible with Openlog firmware
2.The bosrd receives the serial and save data in text format, to ficiliate future observation.
3.4G following TF card with FAT16 format, if your tf card≥4GB please usefat32 format.
4.On board arduino pro mini(328p 16m) bootloader easy to change and update firmware
5.Used to do a GPS recorder, temperature recorder, position recorder, data recorder, data storage application etc.
Opensoure hardware and software:
Interactive log viewer(PC):
Packgae Includes:
1 x Flight Controller
4.On board arduino pro mini(328p 16m) bootloader easy to change and update firmware
5.Used to do a GPS recorder, temperature recorder, position recorder, data recorder, data storage application etc.
Opensoure hardware and software:
Interactive log viewer(PC):
Packgae Includes:
1 x Flight Controller
Advertising