Output capacity: continuous current 40A, instantaneous current 52A (not less than 10 seconds);

Power input: 2-3 cells lipo batteries

BEC output: 5V @ 2A (linear mode)

Refresh rate: 50Hz-432Hz;

Size: 50mm (length) * 30mm (width) * 10mm (height);

Weight: 38g;

Safe power-on function: When the power is turned on, the motor will not start immediately no matter the throttle rocker is in any position, to avoid personal injuries;

No throttle stroke adjustment.

Program setting items: Can be set into a brake or no brake mode by remote control throttle rocker.

● Factory is no brake mode.

● Brake mode setting: Remote control starts, the throttle is maximal, the electric power is turned on and meanwhile sends a quick "beep" alarm sound, the throttle beeps the lowest to hear the "beep" alarm sound, and the braking mode setting is completed;

● Brake settings: no brake / brake;

● battery type: lithium battery;

● Low-voltage protection mode: soft-off / hard-off;

● Low voltage protection threshold: low / medium / high; adaptive;

● start-up mode: soft;

● Progressive: low / medium / high; comprehensive protection features:

● Undervoltage protection: When the battery voltage is lower than the protection threshold, the ESC will automatically reduces the output power;

● Over-voltage protection: Iwill not start when the input voltage exceeds the input range, automatic protection, at the same time issued a rapid "beep" alarm sound;

● Overheat protection: built-in temperature detection circuit, the ESC automatically reduce the output power when the temperature is too high;

● Remote signal loss protection: Reduce power 1 second after the loss of remote control signal, then turn off the output if no remote control signal for 2 seconds.

● ESC performance is better when use together with MC transmitter.

Features:

Pacakge Included:
1X Microzone MC 2-4S 40A Brushless ESC