Description:
This micro PDB is about 45 percent more compact than an ordinary 35 x 35mm PDB and it is capable of offering you 2A continuous output current with 3 - 5S input. It can be used to distribute power for 4 ESCs and to provide dual synchronized and regulated DC outputs for powering cameras, servos, RC receivers, flight controllers, video transmitters, LEDs, etc.

Main Features:
- 2oz copper and 4-layer PCB
- ESC and battery soldering pads in pairs
- 5V and 12V BEC
- LED indicator and short circuit protection
- Compact and lightweight

Specifications:
General:
Input voltage ( 3 - 5S operation ): 7 - 21V DC
Regulated 5V and 12V output
LED power indicators ( 5V and 12V output )
4 ESC outputs

5V BEC
Designed for RC receivers, flight controllers, OSD, and servos
DC-DC synchronous buck regulator
Voltage: 5.0 + / - 0.1V DC
Continuous current: 2A ( max. 2.5A )
Output ripple: 40mV ( Vin = 16V, Vout = 5V at 2A load )

12V BEC:
For 4 - 5S LiPo ( 12.8 - 21V DC )
Standard output designed to power cameras, video transmitters, etc.
DC-DC synchronous buck regulator, efficiency up to 96 percent
Voltage: 12.0 + / - 0.2V DC
Output ripple: 20mV ( Vin = 16V, Vout = 12V at 2A load )
Continuous current: 2A ( max. 2.5A )
At 3S LiPo: output voltage = battery voltage x 95 percent
Dimensions: 32 x 22 x 3 mm
Weight: 3.39g

Click here to download the user manual.

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.