iFlight Force Mini VT5804 5.8G 48CH 0/25/100/200mW Switchable FPV Transmitter Support OSD - 17.00 €

iFlight Force Mini VT5804 5.8G 48CH 0/25/100/200mW Switchable FPV Transmitter Support OSD
Seller: Banggood,
Free shipping aviable, Registered postage from 25 €


iFlight Force Mini VT5804 5.8G 48CH 0/25/100/200mW Switchable FPV Transmitter Support OSD

Description:

Brand Name: iFlight
Item Name: Force Mini VT5804
Format: PAL/NTSC

Input Voltage: 7-24V DC
Channel: 48
Power Transmission: 0mW / 25mW / 100mW / 200mW
Size (mm): 27 * 27 * 4.5
Mounting Holes: M3
Mounting Holes Size: 30.5x30.5mm
Weight: 3.5g(including antenna)
Connector Type: IPEX Connector
Pigtail Cable Connector Type: IPEX - SMA Female
Protocol: IRC Tramp


Features:
- Support OSD Frequnecy and Power tuning.
- Stable output power, far transmission distance: ≥0.5km@25mW, ≥0.8km@100mW, ≥1km@200mW.
- Transmit power 4 gear switch: 0mw/25mW/100mW/200mW.
- Output 48 frequency points, and has E group 8 race frequency at the same time using each other without interference.
- Frequency lock fast, boot does not interfere with companions.
- Built-in output power self-check function.
- Full format video format: NTSC /PAL.
- Wide input voltage range (7V~24V), low power consumption (+12V/170mA@200mW).
- Small volume and lightweight, M3 mounting holes correspond exactly all equally sized flight controls.

Smart Audio - OSD Frequency and Power Tuning:
Power the Force VTX by 7-24V, Connect the RX port on VTX to FC. Let's take iFlight REVO Bee F4 as example, RX port on VTX connect to RX port on FC, Video IN on VTX connect to Video Out on FC. Bind Radio control to receiver, receiver connect to FC finish setting and control via radio control, and open Betaflight, choose UART6 in Port configuration on Betaflight, IRC Tramp on Peripherals position, click save.
And now, connction and dedug on Betaflight is finished. Now you can dedug via radio control, pull the throttle to middle, Yaw to far left, Pitch to top, and now there will be debug interface popup, Pitch up/down as choose, Yaw left right as confirm and quit, you can set PID, OSD, Frequency and channel, VTX power, after finishing setting you can quit and fly.

English Manual, Click Here

Package Included:
1x Force Mini FPV Transmitter
1x 1.25T 6Pin connecting cable
1x Pigtail cable
1x IPEX Transmitting Antenna
1x Instruction




















More similar


Add Comment




All Rights Reserved and belong to their respective owners. (Logos, Photos, Videos and etc.) Powered by MiReina.lt