Item Brand:HGLRC-FLIPSKY

Item name: FSESC6.6 60A ESC

Net weight: 380g
Gross weight:550g,with packging

Aluminum box size:100mm*92mm*22.5mm

Packaging size:200mm*140mm*40mm

Spec
Hardware: V 6.6
Firmware: V3.37
Voltage: 6V - 60V (Safe for 3S to 12S LiPo)
Voltage spikes may not exceed 60V
Current: Continuous 60A, Burst 150A. Values depend on the temperature and air circulation around the device
5V 1.5A output for external electronics
3.3V 1A output for external electronics
Modes: DC, BLDC, FOC (sinusoidal)
Supported sensors: ABI, HALL, AS5047
include Anti-spark switch
include Waterproof aluminum case
For more information you can click here

Features
Measure current and voltage of all phases
Regenerative braking
Traction control (single and double settings)
Sensor or sensorless operation + hybrid mode
Configurable RPM, Current, Voltage and Power Limits
Input source: PPM, simulation, NRF Nyko Kama Nunchuck
Communication ports: USB, CAN, UART, NRF, Bluetooth
Throttle curves and ramps for all input sources
Separate acceleration and brake throttle curves
Seamless four-quadrant operation
Motor speed, ampere hours, watt hour count
Instant data analysis and reading via communication port
Adjustable different protections:
Low input voltage
High input voltage
High motor current
High input current
High regenerative braking current (separate limit of motor and input)
High speed (separate limit in each direction).
Over temperature (MOSFET and motor)

1X FSECS6.6 + Aluminium case

1X USB micro Flash Charge VOCC Cable

1X Mini Micro JST 2.0 PH 3-Pin Connector plug with Wires Cables

1X Manual