FLYWOO F405 F4 Flight Controller Built In OSD 5V 9V BEC ICM20689 & Power Hub-LED Rev1 PDB 3-8S & 4 PCS WS2812 8 Bits LED Board
Description:
F405 Flight Controller:
Size: 36*40mm
Hole: 30.5*30.5 φ3mm
Weight: 8.3g
MCU: STM32F405RGT6
Max frequency: 32K
GYRO: ICM20689
BARO: BMP280
FLASH: 16M
BEC: 5V 1.5A / 9V 1.5A
Input voltage: 3-8S
Firmware: FLYWOOF405
Installs way: FPC connector & 3M absorbing sponge
Dual shock absorption device (3M sponge & absorbing screws)
Support camera menu settings
Max voltage 42V input
5 functional UARTS (UART1,3,4,5,6)
Max 8 motor output
Support SBUS, iBus, Spektrum, Crossfire receiver
FLYWOO Power Hub-LED Rev1 PDB:
Size: 44.7*47.8mm
Hole: 30.5*30.5mm, φ3mm
Weight: 10g
BEC: 5V 2A/9V 2A
Input voltage: 3-8S
Max Current: MAX 200A+
PCB: 6 layer-4oz
Max voltage 50V input
Build in current sensor
Build in 4*WS2812 LED & Pads
WS2812 8 Bits LED Board:
Weight: 1.82g
Voltage: 5V
These LEDs can be programmed via Betaflight and Cleanflight. They require 5V and will not work on 12V.
These LEDs are not as bright as the 12V LEDs, but they can be programmed for low voltage, flight modes and patterns.
FC Addressable LED: Full Colors Range
Package included:
1 x FLYWOO F405 flight controller
1 x FLYWOO Power Hub-LED Rev1
1 x FPC connector
1 x 3M absorbing sponge
1 x 8PIN SH1.0 connector
4 x Absorbing screw
4 x WS2812 8 bits LED board
Advertising