Description
Item No.CYS-S8221
Type Digital
Weight1 3g
Size22.9*12*25.4mm
Control System (+)Pulse Width Control 1500usec Neutral
Required Pulse
Operating Voltage4.8~6.0Volts
Operating Temperature Range(-)10 to +50 degree C
Operating Speed (4.8V)0.10sec/60° at no load
Operating Speed (6.0V)0.08sec/60° at no load
Stall Torque (4.8V)1.0kg.cm
Operating Temperature Range(-)10 to +50 degree C
Operating Speed (4.8V)0.10sec/60° at no load
Operating Speed (6.0V)0.08sec/60° at no load
Stall Torque (4.8V)1.0kg.cm
Stall Torque (6.0V)1.2kg.cm
Operating Angle45deg.one side pulse traveling 500 usec
360 ModifiableNo
DirectionAnticlockwise/Pulse Traveling 1000~2000usec
Current Drain (4.8V)10mA/idle and120mA no load operating
Current Drain (5.0V)10mA/idle and 140mA no load operating
Current Drain (4.8V)10mA/idle and120mA no load operating
Current Drain (5.0V)10mA/idle and 140mA no load operating
Stall Current900mA/1000mA
Dead Band Width2usec
Motor Type3 Pole Ferrite Drive
Bearing TypeDual Ball Bearing
Horn gear spline21T
Gear TypeMetal
Important Notes:
-Refer to the figure when installing the servo accessories.
-For engine powered airplanes and boats, rubber must be used to reduce vibration.
- Please choose correct model for your application.
-Torque over-loaded will damage the servo's mechanism-.
- Keep the servo clean and away from dust, corrosive gas and humid air.
Package Included:
1 xCYS-S8221 Digital Metal Gear Servo
Advertising