Specification:
Brand Name: Betafpv
Model: Beta65 Pro
Item Name: 65mm Wheelbase 1S Brushless Whoop FPV Racing Drone
Wheelbase: 65mm
Version: BNF ( With Receiver and Battery)
Receiver (Optional) :Compatible Frsky Receiver
Compatible Futaba Receiver
Compatible Flysky Receiver
Compatible DSM2/DSMX Receiver
Weight: 23.3g (without battery)
| F4 1S Flight Controller |
Item Name: Betafpv F4 1S FC MCU: STM32F411CEU6 (100MHZ) Sensor: MPU-6000 Firmware: betaflight_matekf411rx_3.4.0 Board size: 26 * 26mm Power supply: 1S battery input Power Cable: 55mm w/ JST PH 2.0 Cable Connector Built-in Betaflight OSD Built-in Receiver Built-in ESC |
| Onboard 5A 4 In 1 ESC |
Power supply: 1S LiPo |
| Onboard Frsky Receiver Version ( Optional) |
Compatible with Taranis, Taranis Plus / X9E / Horus X12S / XJT Modules. Pay attention, this is a SPI connection receiver. In Betaflight Configuration, it should be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode. |
|
Onboaed Flysky Receiver Version ( Optional) |
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch (AFHDS) or 14ch (AFHDS-2A)
Failsafe support
|
|
Onboard DSM2 / DSMX receiver version ( Optional) |
Serial bus receiver Protocol: DSM2/DSMX compatible Channels:6-9 (Depend on your radio) |
|
Onboard Futaba receiver version( Optional) |
Compatible Futaba receiver |
| 0603 19000KV Motor |
Model: 0603
KV: 19000KV
Plug: Micro JST-PH 1.25 3-pin connector
Height: 16.2mm
Width: 10mm
weight: 1.6g (without connector)
Shaft: 1.0mm
KV (rpm/V):16000KV
Voltage: 3.7V-7.4V
Battery: 1S lipo battery (2S is not recommended)
Load Current: 1.8-3.8A
Pull: 23-40g
Power: 6.7-28W
Efficient: 3.4-1.4g/W
|
| Propeller |
31mm 4-blade Propeller |
|
5.8G VTX AIO Camera |
5.8G 48CH 25mW VTX Output power: 25/200mw (25mW default) Frequency: 48CH With Raceband: 5362-5945MHz Input voltage: 2.9V 5.5V Camera Field of view: 100-120° Video Format: NTSC Antenna: Omnidirectional ANT Frequency: 5.8GHz 6bands 48 channels With Raceband Smartaudio ready(Frsky EU-LBT and DSMX version not compatible) Size: 27x17x14mm ( L*W*H ) Weight: 4.7g |
| Lipo Battery |
1S 4.35V 260mAh 50C/80C Lipo Battery |
Package Included:
1x Beta65 Pro 1S Racing Drone
1x Battery
Advertising