4 PCS RGB LED Board 5V RGB5050 7 Colors with BEC for QAV180 210 250 FPV Racer

Universal version

APM version


Connection diagram:
Connection diagram of univesal version (There are two modes)




Connection diagram of APM version


Don't come with the frame kit.

Description:
The RGB LED board comes with RGB5050 LEDs. Seven colors are selectable by means of code switches.
This LED board gives an eye-catching effect to your multirotors or planes when illuminated.

Specification:
Item name: RGB LED Board
Voltage of LED: 5V
Input of BEC: 7~28V
Output of BEC: 5V
Color: red, green, blue, purple, yellow, white, cyan-blue
Suitable for QAV180, 210, 250, F330, F450 etc.

The RGB LED board have two versions: universal version and APM version.

Universal version:
Suitable for all flight controller.
Through the control module, it can control three modes of LED: keep light, turn off and flash.
In the flashing mode, it can control the frequency and brightness.

APM version:
Only work for APM2.5 2.6 2.8 flight controller.
According to unlock state, GPS state and power conditions of flight controller, LED light will flash or keep light.
When APM flight controller doesn't unlock, two corresponding LED keep flash, if unlock, they will keep flight.
When GPS doesn't position, two corresponding LED keep flash, if do, they will keep flight.
(Note: if the flight controller doesn't connect to the GPS, these two LED light don't work)
When the power of flight controller is too low, buzzer of driver will ring.

Package included:
4* RGB LED board
1* BEC
1* controller/APM driver
1* JST antenna
4* LED light antenna
2* heat shrink tube
4* 3M tape