3B-R 214mm Carbon Fiber 3.5mm Bottom FPV Racing Frame with PDB board
Specification:
Item name: 214mm Carbon Fiber 3.5mm Bottom FPV Racing Frame
Wheelbase: 214mm
Meterial: 3K Carbon fiber
Bottom plate thickness: 3.5mm
Side plate, top plate, SMA installation plate thickness: 2mm
Empty weight: 79g (without floor corner protectors and battery plate)
Feature:
1.All the carbon fiber plates are made of custom-made pure carbon fiber 3k cloth and military grade epoxy. The parts are cut with a certain angle to ensure the strength as well as the flexility of our frame. The frame becomes more endurable if you use 3M 171 glue around the side of the carbon fiber plate.
2.To reduce the wind drag, the arms are designed to be narrow (only 14mm wide), with the upper plate tilted. A platform is designed for installing HD camera. Batteries can be placed there if you don’t need a camera. This not only reduces battery accidents but also gets the machine’s type heart closer to its center of gravity, which makes the machine swifter.
3. Four pure carbon fiber protectors, nice and light, are designed so that the ends of the arms are less easily broken. Unlike the heavy motor protective cover which increases wind drag and is not good for heat dissipation, this design helps to prolong the service life of the bottom plate and saves the cost of replacement.
4. Instead of the commonly used round mounting aluminum cylinder, high strength aluminum alloy support is used in our design. The mortise and tenon structure on the side plates can transfer the forces on the upper and the lower plates, which makes the frame into a whole and increases the strength of the main body.5. For the design of the other parts, we take your convenience into full consideration.
Recommend part:
Motor: 2204 2300/2600KV
ESC: 20-40A
Propellre: 5 inches
Flight controller: F3
FPV Camera: Swift, Owl, Eagle, 1177, 1190
GOPRO,SESSION, Yi, Runcam2, etc
Package Included:
1 X FPV racing frame
Specification:
Item name: 214mm Carbon Fiber 3.5mm Bottom FPV Racing Frame
Wheelbase: 214mm
Meterial: 3K Carbon fiber
Bottom plate thickness: 3.5mm
Side plate, top plate, SMA installation plate thickness: 2mm
Empty weight: 79g (without floor corner protectors and battery plate)
Feature:
1.All the carbon fiber plates are made of custom-made pure carbon fiber 3k cloth and military grade epoxy. The parts are cut with a certain angle to ensure the strength as well as the flexility of our frame. The frame becomes more endurable if you use 3M 171 glue around the side of the carbon fiber plate.
2.To reduce the wind drag, the arms are designed to be narrow (only 14mm wide), with the upper plate tilted. A platform is designed for installing HD camera. Batteries can be placed there if you don’t need a camera. This not only reduces battery accidents but also gets the machine’s type heart closer to its center of gravity, which makes the machine swifter.
3. Four pure carbon fiber protectors, nice and light, are designed so that the ends of the arms are less easily broken. Unlike the heavy motor protective cover which increases wind drag and is not good for heat dissipation, this design helps to prolong the service life of the bottom plate and saves the cost of replacement.
4. Instead of the commonly used round mounting aluminum cylinder, high strength aluminum alloy support is used in our design. The mortise and tenon structure on the side plates can transfer the forces on the upper and the lower plates, which makes the frame into a whole and increases the strength of the main body.5. For the design of the other parts, we take your convenience into full consideration.
Recommend part:
Motor: 2204 2300/2600KV
ESC: 20-40A
Propellre: 5 inches
Flight controller: F3
FPV Camera: Swift, Owl, Eagle, 1177, 1190
GOPRO,SESSION, Yi, Runcam2, etc
Package Included:
1 X FPV racing frame
Advertising