Here is a great little P51B model! It has the cool looking printed covering with the panel lines and weathering. I will be using a 10cc Gasoline engine on it, by Evolution.
Initial impressions are good! Looks great, packaged well, should be alot of fun. The build has begun! This is recommended for E power as well!
Electric retracts will be used on mine, they come with wire landing gear if you do not want retracts. The tail wheel is not retractable. Excited to get it completed! Subscribe so you dont miss the maiden!
Features:
All Balsa and lite-ply construction
Fully covered in weathered detail
Hand painted pilot
Fiberglass cowling
Top Hatch for battery access
Pre-hinged and installed control surfaces
Includes:
Assembly instructions with stage photos
Tail gear assembly and main wheels
Servo trays
Engine mounts
Fuel tank
Spinner
Decals and all hardware
Recommended 3S electric setup:
Motor: Dualsky XM4250EA-5 880Kv 1008 Watt Brushless Outrunner
ESC: Dualsky XC6018BA 80A (100A burst)
Battery: 11.1V, 4000mAh, 35C lipo
Prop: 14x8 or 13x10
Recommended 4S electric setup:
Motor: Dualsky XM4254EA-4.5 790Kv 1128 Watt Brushless Outrunner
ESC: Dualsky XC8018BA 80A (100A burst)
Battery: 14.8V, 4000mAh, 35C lipo
Prop: 13x8 or 13x10
Model VQA07
Material: Laser cut balsa and ply
Wingspan: 58.2" (1478mm)
Wing Area: 630 sq in (40.65 sq dm)
Length: 46.8" (1190mm)
Radio: 5 channels, 4 servos for electric, 5 for glow
Engine: .46 - .50 2-stroke or electric equivalent (below)
Weight: 7.0lbs (3.2Kg)
Landing Gear: Optional Electric Retracts and Struts available (VQ-ARE03)