Flight Review of the Bolt250 and the final Build. In this video we’ll go through the final build on the Bolt250 that Thomas recently completed. All in all the build went pretty smoothly. The only issue we had was achieving camera angle but that was resolved with the newly designed Top Plate.
Part 1:
The BOLT250 includes:
CF Top Plate : 1.5mm
CF Upper Bottom Plate : 1.5mm
CF Lower Bottom Plate : 1.5mm
CF Arms : 3mm for 5in or 6in props
M3 12mm - 32pcs G308 Stainless Steel Machine Screws
M3 17pcs G308 Stainless Steel Nylon Lock Nuts
M3 31mm - 8pcs Aluminium Hex Standoffs (Black)
M3 10mm - 4pcs Nylon Hex Standoffs (Black)
M3 6mm - 4pcs Nylon Pan philips Machine Screws (Black)
M3 6mm - 16 pcs G308 Stainless Steel Machine Screws
M3 17pcs G308 Stainless Steel Machine washers
M3 1mm - 24 pcs black 1mm nylon washers
Bonus items included:
2mm Zip Ties - 20pcs Black 2mm zip ties to secure components as required.
4mm Zip Ties - 4pcs Black 4mm zip ties to secure RX antenna.
3M Foam Tape - 10mm black double sided foam tape by 3M to secure components
M3 25mm Legs with M3x10mm machine screws.
Hope you enjoy this video.
Like us on our FaceBook Page & Twitter
/
Bolt250
/
RCGroups Thread
Banggood PDB 3-4S