Get one here:
Follow on Facebook:
Awesome handling out of the box! I did zero PID tuning, cranked up my throws in the TX to 130-140% and went for it, very happy with its handling. Im running a Tattu 4s 1550 lipo. VTX is on low power. Im happy with the video image and wide angle.
The OSD is so easily adjustable, drag to position, click what you want to see or not see, even the final after landing screen is easily adjustable. Love these F4 FC's! I didnt get the redcon rx to bind to my radio, so I did end up using a rx I had here already, Ill have to spend more time figuring that one out.
PLEASE SUBSCRIBE!
HIT:
- Price
- F4 FC is awesome
- Zero tuning needed!
- Wide angle camera, easily adjustable angle
- Extra props and camera protector
- Durable
MISS:
- No Manual, had to surf the net for added info
Description:
X215 Pro features the latest high-performance components, bringing you unprecedented FPV racing. With 3K carbon fiber material imported from England, reinforced by the aluminum parts, the airframe contributes to much higher maneuverability as well as the marvelous F4 FC and 4-in-1 BLHeli - S 30A DShot ESC. The combination of the most powerful 2206 brushless motors and aerodynamic three-blade propellers generate tremendous thrust for breathtaking high-speed flying. 1200TVL CCD camera, 5.8G video transmitter and pagoda antenna allow you to get the high-quality image and get it transmitted without latency.
Main Features:
● Superior 3K carbon fiber frame, 30 percent lighter, 50 percent stronger, with 4mm thick arm, solid aluminum parts
● Advanced flight control system consists of FuriBee F4 FC, 4-in-1 BLHeli - S 30A DShot ESC
● Efficient propulsion system - 2206 2600KV high KV brushless motor and 5048 three-blade propeller
● 1200TVL CCD camera, 5.8G FPV from more than 2km away, omnidirectional signal coverage
Specifications:
General
Brushless motor: 2206 2600KV
Propeller: 5048 three-blade, PC + fiberglass
Video transmitter: 5.8G 40CH 0 / 25mW / 300mW
Antenna type: pagoda antenna
2-in-1 LED buzzer: with four WS2812B LEDs, 4.5 - 5.2V input
Camera mount for GoPro Session: yes
Carbon Fiber Frame
Wheelbase: 215mm
Weight: 95g
Size: 175 x 225 x 60mm
Arm thickness: 4mm
Lateral plate thickness: 1.5mm
Aluminum part width: 5mm
F4 Flight Controller
MCU: STM32F405RGT6 32-bit processor
IMU: ICM20689 ( SPI ), up to 32KHz
Input voltage: 7 - 42V
Supported firmware: BetaFlight ( pre-loaded ), CleanFlight
Integrated OSD: yes
BLHeli - S pass-through: support
Automatic voltage monitoring: yes
BEC output: 5V 1.5A, 3.3V 200mA
Mounting hole spacing: 30.5mm
2-in-1 LED Buzzer Module
LED strip model: WD2812B
Operating voltage: 4.5 - 5.2V
FPV Camera
Image sensor: super HAD II CCD
Horizontal resolution: 1200TVL
TV system: PAL / NTSC
5D-OSD button: yes
Input voltage: 12V DC
Note: the pattern colors ( dark gray and black ) of airframe will be sent randomly.
Specification
General
Type: Frame Kit
Version: PNP
Motor
Model: 2206
Motor Type: Brushless Motor
KV: 2600
Flight Controller
Flight Controller Type: F4
Camera
Video Resolution: 1200TVL ( horizontal )
Sensor: CCD
Electronic Speed Controller
Firmware: BLHeli-S
Continuous Current: 30A
Dimension and Weight
Product weight: 0.4800 kg
Package weight: 0.6830 kg
Product size (L x W x H): 28.00 x 24.00 x 16.00 cm / 11.02 x 9.45 x 6.3 inches
Package size (L x W x H): 30.00 x 25.00 x 18.00 cm / 11.81 x 9.84 x 7.09 inches
Package Contents
Package Contents: 1 x X215 PRO FPV Racing Drone, 1 x 5.8G Pagoda Antenna, 1 x Camera Mount