Intech BR-6e Pro 1/8 Electric Buggy KIT - The Reveal
Here's my reveal of my Intech BR-6e Pro 2.0 1/8th scale 4wd Electric Buggy Kit. After several hours of building, painting and installing electronics, my BR-6e is ready to hit the track!
Intech Racing is known for their top notch quality parts packed in a box at a very reasonable price. The BR-6e is their flagship 1/8th scale electric 4wd buggy KIT. Oozing with Carbon Fiber, Aluminum and Hardened Steel, this KIT brings in value where some of the big names in RC don't quite hit the mark.
Want even more of The RCNetwork? Follow me/Like me on these platforms:
/
/
IntechRacing Website:
/
BR-6e Specs:
Pricing:
BR-6 E
1/8th Pro Kit Electric Buggy
Kit: *Requires assembly, shock oil, tires, ESC, motor, and electronics
New Features on the BR-6:
‧5mm Longer CNC Swiss Aluminum Hard Anodized 7075-T6 3mm Lightened Narrow Chassis
‧Narrowed chassis side guards
‧New position of the battery box (forward mounted)
‧New 2 piece low center of gravity center diff mount
‧New longer 15mm Threaded Big Bore Front/Rear shocks
‧New Carbon Fiber shock towers, steering rack, front support plate, and center diff mount plate
‧New gear ratio: Front/Rear Straight Cut : 43T crown gear - 10T pinion gear. Center : 42T steel spur gear
‧Forward Cab body
Additional INTECH Racing Features:
2 piece radio tray
Lightened spur gear
Lightened Ring gears
High Down-force wing
6 Captured CVD's
10' Caster Blocks
10' Chassis Kick-up
Rubber Sealed Ball Bearings Throughout
Center CVD Joint Boots
Carbon Fiber Servo Plates
Adjustable Turnbuckles
5,000 - 3,000 - 1,000 Diff Oils
1.5, 1.4, 1.3mm Shock Pistons
2.4/2.6mm Front/Rear Sway Bars
7075-T6 Aluminum Adjustable Suspension Plates
4mm Wide Wheel Hexes
Serrated Locking Wheel Nuts
Wheel Base Adjustable 12mm
1-4' Adjustable Rear Toe
0-4' Adjustable Anti-Squat
18'-22' Adjustable Caster
Personal Transponder Mount
Front & Rear Composite Chassis Braces
Spring Coil Exhaust Pipe Mount
Adjustable Front Arm Sweep
4mm Inner and Outer Captured Hinge Pins
Adjustable Rear Sway Bar Mounting Position
14 Shock Mount Locations
5 Camber Link Locations
Rear Chassis Skid Plate
*Requires assembly, shock oil, tires, motor, and electronics
Length 508mm
Width 309mm
Height 196mm
Wheel Base 318~328mm
Gear Ratio 10.62:1
Weight approx. 3200g
Intech Racing is known for their top notch quality parts packed in a box at a very reasonable price. The BR-6e is their flagship 1/8th scale electric 4wd buggy KIT. Oozing with Carbon Fiber, Aluminum and Hardened Steel, this KIT brings in value where some of the big names in RC don't quite hit the mark.
Want even more of The RCNetwork? Follow me/Like me on these platforms:
/
/
IntechRacing Website:
/
BR-6e Specs:
Pricing:
BR-6 E
1/8th Pro Kit Electric Buggy
Kit: *Requires assembly, shock oil, tires, ESC, motor, and electronics
New Features on the BR-6:
‧5mm Longer CNC Swiss Aluminum Hard Anodized 7075-T6 3mm Lightened Narrow Chassis
‧Narrowed chassis side guards
‧New position of the battery box (forward mounted)
‧New 2 piece low center of gravity center diff mount
‧New longer 15mm Threaded Big Bore Front/Rear shocks
‧New Carbon Fiber shock towers, steering rack, front support plate, and center diff mount plate
‧New gear ratio: Front/Rear Straight Cut : 43T crown gear - 10T pinion gear. Center : 42T steel spur gear
‧Forward Cab body
Additional INTECH Racing Features:
2 piece radio tray
Lightened spur gear
Lightened Ring gears
High Down-force wing
6 Captured CVD's
10' Caster Blocks
10' Chassis Kick-up
Rubber Sealed Ball Bearings Throughout
Center CVD Joint Boots
Carbon Fiber Servo Plates
Adjustable Turnbuckles
5,000 - 3,000 - 1,000 Diff Oils
1.5, 1.4, 1.3mm Shock Pistons
2.4/2.6mm Front/Rear Sway Bars
7075-T6 Aluminum Adjustable Suspension Plates
4mm Wide Wheel Hexes
Serrated Locking Wheel Nuts
Wheel Base Adjustable 12mm
1-4' Adjustable Rear Toe
0-4' Adjustable Anti-Squat
18'-22' Adjustable Caster
Personal Transponder Mount
Front & Rear Composite Chassis Braces
Spring Coil Exhaust Pipe Mount
Adjustable Front Arm Sweep
4mm Inner and Outer Captured Hinge Pins
Adjustable Rear Sway Bar Mounting Position
14 Shock Mount Locations
5 Camber Link Locations
Rear Chassis Skid Plate
*Requires assembly, shock oil, tires, motor, and electronics
Length 508mm
Width 309mm
Height 196mm
Wheel Base 318~328mm
Gear Ratio 10.62:1
Weight approx. 3200g
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising