The Vifly R220 models are durable quadcopters intended for those wishing to enter into FPV racing. For their RTF versions, everything is installed and ready to go out of the box, no programming or configuration needed. Vifly has updated their R220 FPV racer (now R220 M2) to include the following improvements over the previous basic R220 model.
1) F4 flight controller (faster processing speed than previous F3)
2) More powerful 2205 2600KV motors
3) Higher amperage Blheli-S 25A ESC
4) Better quality camera with 700TVL.
5) Improved "out of the boX" Betaflight PID Tuning.
Although tuning is not needed, you can do so if you wish using Betaflight configuration software. For the BNF version demonstrated in this video, you'll need to provide your own battery (3S or 4S) and your own transmitter (Flysky, Frsky, or DSM2/DSMX). Buy the R220 M2 here and check out Vifly on FaceBook: YouTube: and FaceBook User Group: /
The protective sandwiched design of this quadcopter makes this one tough drone. Intended for intermediate fliers wishing to experience FPV racing.
VIFLY is a technology startup who is dedicated in FPV racing drones. Their goal is to design and produce one racing drone that everybody can fly.
Pros
- Good stable flier, particularly in Angle mode. Should be a good entry level racer for intermediate fliers (NOT recommended for total beginners. This is not an appropriate learn to fly quadcopter.)
- Unique sandwich design available in yellow, red, white, or black. All flight components are encased and protected within rubbery side panels, and composite top and bottom plates. I didn't crash test it, but it sure feels and looks like it can easily withstand a crash.
- Swivel lens 700 TVL camera.
- 40 channel FPV transmitter, with LED display, and selectable power levels (25mW, 200mW, and 500 mW). Comes with RHCP antenna.
- On Screen Display (OSD)
- 25 A ESC's, and 2600 KV motors.
- 3S 1800mah battery (RTF model only. Can also use optional 4S as demonstratd in this video)
- Beeper with low power, and lost quadcopter alert beeping.
- Output video and power plug for optional DVR.
- Versatile camera platform can accommodate most if not all action cameras.
- RTF version comes with Flysky i6 transmitter
Cons
- Difficult to access the interior components. This is by design to protect these components. But advanced fliers who like to tinker with the innards might not like this ;-)
- Took a little work to setup and bind the Frsky BNF version. For Frsky BNF you'll need to set the transmitter to D16 Mode (Vifly, please include a slip of paper in the Frsky BNF box saying such), and you may also need to set the channel mapping (in Betaflight) from AETR to TAER.
Vendor's Description:
Size (L x W x H) 200x195x75mm
Wheelbase 220mm
Weight 450g (3S Battery included)
Remote Controller FlySKY i6-VF
Receiver FlySKY FS-iA6B
Main Controller Omnibus F4, CPU 168Mhz
OSD Betaflight OSD
Brushless Motor 2205 (CW/CCW) KV2600
ESC BLHeli 25/30A
Propeller 5045
Battery 11.1V 1800mAh 35C 3S Li-PO (RTF version only)
Working Environment -10℃ ~ +40℃
Camera Horizontal Resolution 700TVL
Field of View 120°
Wireless Video Transmitter
Working Frequency 5.8GHz
Channel Bind A/B/C/D/E sections 40 channels
Output Power (CE) 25/200/500mW
Antenna Right-handed circular polarization
Affiliate links: At no cost to you, I do receive a small commission for sales resulting from these links.
This video along with every video of the Quadcopter 101 channel was produced and edited with VSDC Free Video Editor. You may download this excellent, and no kidding "free" video editor here
MUSIC LICENSE
"Awel" by stefsax
is licensed under a Creative Commons license:
/
music was shortened to fit length of video.