Alienflight F4 Flight controller Flight test - The AlienFlight F4 Hexa Brushless is an experimental flight controller designed to pilot small brushless powered Quadcopters – Hexacopters. It features an ARM STM32 F4 processor, side USB for easy firmware flashing, and parameter editing, MPU6500 Gyro/Accelerometer, and built in bind/boot switches for hassle free binding/flashing.
Great Article by Oscar Liang of difference between F1,F3,F4,F7 flight controllers - /
Also recommended Flight Controllers by Oscar Liang - /
RCGroups Alienflight Discussion Board -
Features
Designed for small Quads using brushless motors and esc’s,
2 – 4S Capable
PDB is part of the board design,
Direct solder esc’s or use 1.5mm/2mm sockets,
Direct solder battery or use 2mm socket,
ARM STM32F4 processor,
USB socket for firmware flashing and parameter editing,
MPU6500 Gyro/Accelerometer connected via SPI,
On board voltage monitoring,
Buzzer pads on bottom of board,
5v @1A output via 1.25mm socket
Dip switch for both Bind and Boot loader mode,
Runs BetaFlight firmware,
Receiver socket with 5v or 3.3v option (Spek sat @3.3v, FrSky @5v),
Dimensions: 28mm x 32mm.
DShot support with DShot "Hack"
Flight Controller Link: /
Motor Soft Mount Silicone Pad w/ 3M Backing - These soft mounts are made from a durable Silicone material with an easy stick backing for simple installation. Just peel off the backing, stick on your quadcopter arm and mount your motor. Optionally you can use a second set under your arm as well to completely isolate the motor mounting screws from the carbon fiber.
My Links
Please Subscribe!
Join Fullscreen, INC the best Youtube MCN
My Instagram: /
MyTwitter:
MySpace:
Add me on Google+:
My Youtube Channel:
-~-~~-~~~-~~-~-
Please watch: "Review: Eachine Roarer 120mm FPV Racing Drone Frame!!! (07.17.2017)"
-~-~~-~~~-~~-~-