Alienflight F4 Micro Brushless Flight Controlller -
/
Features:
Designed for small Quads using brushless motors and esc’s,
2 – 4S Capable
PDB is part of the board design,
Direct solder esc’s or use 1.5mm/2mm sockets,
Direct solder battery or use 2mm socket,
ARM STM32F4 processor,
USB socket for firmware flashing and parameter editing,
MPU6500 Gyro/Accelerometer connected via SPI,
On board voltage monitoring,
Buzzer pads on bottom of board,
5v @1A output via 1.25mm socket
Dip switch for both Bind and Boot loader mode,
Runs BetaFlight firmware,
Receiver socket with 5v or 3.3v option (Spek sat @3.3v, FrSky @5v),
Dimensions: 28mm x 32mm.
DShot support with DShot "Hack"
AlienFlightNG was created after Lance moved his focus to other things a while ago. Lance took with him the results of his and Michael’s common work on the AlienFlight F4 controllers which had not been released at this point in time. Michael wanted to continue with the ideas of very unique flight controllers for small brushed and brushless multicopters. Gary joined up with Rob and Michael to create the initial team for AlienFlightNG. After some general design discussions, Gary created new board layouts from scratch for the first generation of the AlienflightNG F4 controllers and we released these board designs to the public. Basically at the very same time, Lance finally made public the Alienflight F4 designs which had been created back when he and Michael worked together.
My Links
Please Subscribe!
Join Fullscreen, INC the best Youtube MCN
My Instagram: /
MyTwitter:
MySpace:
Add me on Google+:
My Youtube Channel: