Review: QAV-x 130mm FPV Racing Drone Maiden Flight!! (05.0702017)
THE BUILD:The QAV-x 130mm FPV Racing Quadcopter.A symmetrical X,light weight,super stiff,finely tuned airframe designed for high performance FPV Drone Racing
Dual purpose FPV and HD camera mounting solution
Wheelbase: 130MM Arm: 2.5MM Bottom: 2.5MM Up board: 1.5MM
Suit for 1104-1806 motor,3 inch prop
Comes with power distribution board. The Raycorp propellers, Pack of 16 Propellers, 8 Clockwise (CW) & 8 Counter-Clockwise (CCW) - Color : Red (8 props) & Black (8 props)
One of the Most Used Propeller for 280, 210 and 250-sized quadocopters, hexacopters and FPV racers
100% Genuine & Brand New. Made with High Quality ABS Plastic for Maximum Performance, Durability and Balance.
Perfect for 280, 250 and 210 sized FPV racers like : QAV250, HK250, Walkera 250, FPV250, QAV250, Blackouts & other multirotors, quadcopters and hexacopter.
Works well with the following motors : all 1806, 2204 & 2206 motors. the motors: Newly designed EMAX RS1306 4000KV high-end brushless motor for FPV racing multirotors Cooling Series.Provided by Crazepony on Amazon.
Designed for 3” propellers up to 4s battery
CW and CCW propeller adapters,preventing the propeller from getting rid off.The Rotation direction of motor was marked on the from bell,making it easier to determine rotation direction for CW and CCW motors.
More RC racing Quad-copter product is provided by Crazepony on Amazon.Bring your eyes into the sky and racing like a free bird, enjoy the ultimate first person view experience.
the Anitvibration Mount: This nifty adapter allows you to mount a micro flight controller on top of a "standard sized" 30.5mm x 30.5mm PDB or electronics stack. Many frames do not have 20mm x 20mm holes to fit a micro FC and this adapter solves that problem. BUT WAIT! There is more! Made of flexible TPU material this mount also has built in vibration isolation. Want to "soft mount" your micro FC? Buy this gizmo
The flight controller: The Lumenier MICRO LUX F4 Flight Controller brings incredible power and performance to the micro brushless world. It uses a powerful F4 processor along with top of the line hardware. Now you can get all the performance from an F4 based flight controller in a micro size! This flight controller uses 20x20mm mounting holes and a low profile design allowing for smaller airframe designs than ever before. The MICRO LUX comes with BetaFlight pre-installed.
THE PARTS:
Raycorp Propellers:
Emax 1306 motors:
Makerfire QAV-X 130mm Frame:
Drone Motor Guards :
catalyst machineworks ANTI-VIBRATION MOUNT:
Other qav-x Videos
My Links
Please Subscribe!
My Instagram: /
Join Fullscreen, INC the best Youtube MCN
MyTwitter:
MySpace:
Add me on Google+:
My Youtube Channel:
Dual purpose FPV and HD camera mounting solution
Wheelbase: 130MM Arm: 2.5MM Bottom: 2.5MM Up board: 1.5MM
Suit for 1104-1806 motor,3 inch prop
Comes with power distribution board. The Raycorp propellers, Pack of 16 Propellers, 8 Clockwise (CW) & 8 Counter-Clockwise (CCW) - Color : Red (8 props) & Black (8 props)
One of the Most Used Propeller for 280, 210 and 250-sized quadocopters, hexacopters and FPV racers
100% Genuine & Brand New. Made with High Quality ABS Plastic for Maximum Performance, Durability and Balance.
Perfect for 280, 250 and 210 sized FPV racers like : QAV250, HK250, Walkera 250, FPV250, QAV250, Blackouts & other multirotors, quadcopters and hexacopter.
Works well with the following motors : all 1806, 2204 & 2206 motors. the motors: Newly designed EMAX RS1306 4000KV high-end brushless motor for FPV racing multirotors Cooling Series.Provided by Crazepony on Amazon.
Designed for 3” propellers up to 4s battery
CW and CCW propeller adapters,preventing the propeller from getting rid off.The Rotation direction of motor was marked on the from bell,making it easier to determine rotation direction for CW and CCW motors.
More RC racing Quad-copter product is provided by Crazepony on Amazon.Bring your eyes into the sky and racing like a free bird, enjoy the ultimate first person view experience.
the Anitvibration Mount: This nifty adapter allows you to mount a micro flight controller on top of a "standard sized" 30.5mm x 30.5mm PDB or electronics stack. Many frames do not have 20mm x 20mm holes to fit a micro FC and this adapter solves that problem. BUT WAIT! There is more! Made of flexible TPU material this mount also has built in vibration isolation. Want to "soft mount" your micro FC? Buy this gizmo
The flight controller: The Lumenier MICRO LUX F4 Flight Controller brings incredible power and performance to the micro brushless world. It uses a powerful F4 processor along with top of the line hardware. Now you can get all the performance from an F4 based flight controller in a micro size! This flight controller uses 20x20mm mounting holes and a low profile design allowing for smaller airframe designs than ever before. The MICRO LUX comes with BetaFlight pre-installed.
THE PARTS:
Raycorp Propellers:
Emax 1306 motors:
Makerfire QAV-X 130mm Frame:
Drone Motor Guards :
catalyst machineworks ANTI-VIBRATION MOUNT:
Other qav-x Videos
My Links
Please Subscribe!
My Instagram: /
Join Fullscreen, INC the best Youtube MCN
MyTwitter:
MySpace:
Add me on Google+:
My Youtube Channel:
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising