SYMA X11 FPV modding build-log
Build-log of my SYMA X11 modding into a FPV plateform. So from my first idea where to install the FPV kit, finally, I finally decided to install it just below the FC board and to shift down the battery bay.
BOM
1) TX58200M:
You can use of course a Boscam TX5823, but I found them more noisy and heating more
2) microCL antenna :
3) Pololu Step down/interférences remover (tuned to 3.85V-3.0V):
4) Micro mini JST connector :
5) MC900-V9 camera:
BOM
1) TX58200M:
You can use of course a Boscam TX5823, but I found them more noisy and heating more
2) microCL antenna :
3) Pololu Step down/interférences remover (tuned to 3.85V-3.0V):
4) Micro mini JST connector :
5) MC900-V9 camera:
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Watch more videos
-
Enduro Rally 2021 - Pabradė military base
Had a wonderful opportunity to be in a very dirty place on a badly rainy morning but with great a... -
DeathStroke BambuLab X1C #Shorts
#shorts DeathStoke wearable mask made with BambuLab X1C #3dprinting -
Dirt bike and quadbike event at Crazy Ferma 2022-02-06
Another great winter event for dirt lovers. This time it was really bad weather, frozen fingers,...
Advertising