This video is now dated - please watch
Or visit
Thank you for watching, Happy flying!
Thanks for watching the video; the team at Banggood sent me a new multi-copter board to try -- the CRIUS SE V2 Multiwii board.
In this video I discuss the board and compare it with the other two I use in my models (Arduino-Mega APM 2.5 and KK2.0) and run through how to setup, wire and configure this board from start to finish.
You can get the same CRIUS SE V2 Multiwii control board (MWC) board at this link:
@
Download the software and configuration files from
1. /
2.
3.
(Use my configuration files at your own risk, they work for me though!)
Details of the Quad:
• Clone F330 frame
• 4 x 20A Simon K flashed ESCs
• 4 x Tunigy D2822/14 1450KV motors
• 300mAh 45c 3S LIPO battery
• AR6100 Rx
Please let me know if you any comments or questions. I will be adding a display, Bluetooth and GPS sensors to the board over the coming weeks and will go through the setup of each.
Quick tip: When you first connect your model to the MultiWiiConf program and you cannot see the movement of the model, click on the Calib_Mag and Calib_Acc buttons to get things working
Thanks for watching - Happy flying!