Some FPV Practice
One of the flights from last Saturday, as you can see a very conservative one because I didn't want to risk damaging the Legend 2 HD camera I was using. This is a great location to practice lines among trees, this makes you less uncomfortable doing this kind of flying over time.
Gear:
Matek-Realacc HUBOSD
Modified 4mm QAV210 frame (slim arms)
Emax RS2205-2300kv motors
DAL Cyclone T5045C props
XM20A esc's (@4khz)
LUX fc @8khz on Betaflight 3.1.0
XSR SBUS frsky rx
Foxeer Legend 2 and Xaomi Yi cams
HS1177 fpv cam with 2.5mm lens
TS5828 600mw vtx
Drone Labs 1500 mAh 4s LiPo
Taranis Plus TX with 5dB antenna mod.
Gear:
Matek-Realacc HUBOSD
Modified 4mm QAV210 frame (slim arms)
Emax RS2205-2300kv motors
DAL Cyclone T5045C props
XM20A esc's (@4khz)
LUX fc @8khz on Betaflight 3.1.0
XSR SBUS frsky rx
Foxeer Legend 2 and Xaomi Yi cams
HS1177 fpv cam with 2.5mm lens
TS5828 600mw vtx
Drone Labs 1500 mAh 4s LiPo
Taranis Plus TX with 5dB antenna mod.
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Watch more videos
-
#Shorts massive servo wire attack
About 200 packs and 1000 servo leads in free fall For many many many planes to build! #shorts ... -
DLG - FLITZ - soaring joy!
The joy of DLG soaring! Pilot and Wing owner - Andrius Narbutas Bright LED: / - More products ... -
Deathstroke 3d printed wearable mask #shorts
Deathstroke 3d printed wearable mask with X1C BambuLab #shorts #3dprinting #deathstroke #bamb...
Advertising