- I got THiS TRUCK at Here is some iNFO about this Radio Controlled Truck Kit, PUT YOURSELF on the WAiT List! In this video I learn how to do some detail painting. I have always wanted to try it out - and figured this would be a perfect opportunity to try my luck! I also wanted to try out a different kind of Masking/Skinning of my Gelande 2. Though I am not the first to try this technique, I wanted to give it a test. I think the end result turned out pretty well! I used "Testers" Enamel paints - used for normal modelling. For my purpose - it seems to work out just fine.
Total Cost for this Particular Rig: Approximately $1200 (You could do it for less)
Kit: 399+ Shipping
ESC & Motor: 240
Servo: 65
Paint & Accessories: 75
Rx Tx: 250
Battery: 70
Punisher Drive Shafts: 80
Spare Tire/Rim: 30
The top cage I used on my rig was hand made, and is not available for sale. Sorry!
I ordered another Rim and Tire for the Spare Tire. It does not come with the truck stock.
From the RC4WD Site:
Experience the versatility and advanced design of the Gelande 2 for yourself. Packed full of capability, the Gelande 2 is ready for any challenging condition. Put your off-road driving to the test and see why the G2 is unmatched in its class!
G2 is built with quality materials and craftsmanship. It can maneuver extreme descents and climbs with ease. The new R3 single speed transmission provides power down to the transfer case and out to the all new Yota II axles.
The core of the G2 is built for the true off-road enthusiast. From customized options to tried and true performance. From emergency and expedition vehicles, to daily drivers and down and dirty off-road rigs. It can pull off many looks and with the endless add-ons offered, you will be able to customize your G2 and have it fit any identity.
The G2 comes with 4 link rear and 3 link front with panhard bar as standard. The servo is mounted on the chassis out of view for a more scale appearance.
Are you ready for your off-road experience?
Custom Designed for True to Scale Looks
Realistic Aluminum Ladder Frame Chassis
R3 Single Speed Transmission
Center Mounted Realistic 4x4 Transfer Case
Cast Metal Axles with Locked Differentials
3 link front and 4 link rear suspension
1.9 Stamped steel beadlocks w/lug nuts
Super grip dirt grabber tires
Chassis mounted steering servo
Plastic fuel cell receiver box
Dual spring oil filled shock absorbers
All New Hammer Transfer Case
Ratio - 1.47:1 Gears - Wide 32P steel gears Features - 8 bearings, cast casing, hardened gears
All New R3 Single Speed Transmission
Ratios: Pinion/spur 14/64 = 4.57:1 Internal  1.78:1
Gears - Wide steel 32P, Delrin spur, slipper clutch
All New Cast Yota II Axles
Ratio: 15/40 = 2.67:1
Width at hex 180.5mm
G2 Suspension
Double triangulated 4 Link rear suspension.
3 Link front suspension with panhard bar
Shock Absorbers
Dual Spring 80mm Shocks - Can be oil filled
Wheels
Type: 1.9 5 lug Wagon Wheels
Hub: Pin type Width: 25mm 
Back spacing: 11mm
Bumpers
Machined billet aluminum, lightweight
G2 Truck Dimensions
Wheels base: 275mm (10.8") 
Width: 220mm (8.7") 
Height: 254mm (10")
Ground clearance: 55mm (2.2")
Final Drive Ratio:  31.9:1 
Weight: 5.58Lbs / 2.533Kg
.
RC ADVENTURES™/RCSparks Studio™ © 2013 Medic Media Productions Inc.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without prior the written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. the RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series on YouTube is intended for entertainment purposes only.