Eachine Micro SkyHunter 780mm - Surprisingly good performance! (maiden and review)
Micro SkyHunter:
⮟⮟⮟OPEN DESCRIPTION FOR MORE INFO⮟⮟⮟
Follow me on Facebook for daily updates: /
Support me on Patreon:
Purchase link for SkyHunter:
An optional All-in-one FPV monitor, video receiver and DVR:
An upgrade camera + Vtx 200mW:
Link to my blog:
Well... words cannot express my delight with this little marvel! Depending on the glue you will use assembly can take from 30 min to 1 hour, all electronics are pre-installed, so you only need to trim the control surfaces, install a radio receiver, plug in a battery and go flying!
Flight performance was very good, plane is quite efficient, 20 mins are possibly on a 3S 1300mAh pack, and also I was not able to stall the damned thing... so you can either go very fast, or you can go very slow and not have to worry about the spiral of death! Exciting for expert FPV'ers, and certainly suitable for beginners as well!
⮟⮟⮟OPEN DESCRIPTION FOR MORE INFO⮟⮟⮟
Follow me on Facebook for daily updates: /
Support me on Patreon:
Purchase link for SkyHunter:
An optional All-in-one FPV monitor, video receiver and DVR:
An upgrade camera + Vtx 200mW:
Link to my blog:
Well... words cannot express my delight with this little marvel! Depending on the glue you will use assembly can take from 30 min to 1 hour, all electronics are pre-installed, so you only need to trim the control surfaces, install a radio receiver, plug in a battery and go flying!
Flight performance was very good, plane is quite efficient, 20 mins are possibly on a 3S 1300mAh pack, and also I was not able to stall the damned thing... so you can either go very fast, or you can go very slow and not have to worry about the spiral of death! Exciting for expert FPV'ers, and certainly suitable for beginners as well!
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Watch more videos
-
DeathStroke BambuLab X1C #Shorts
#shorts DeathStoke wearable mask made with BambuLab X1C #3dprinting -
#DriftMolėtai "Street" drift race finals 2022
Happy drift day! Had a chance to be part of Moletai street drift race Finals! #DriftMolėtai grį... -
#shorts SnapMaker J1 IDEX 3d printer creation satisfaction
#shorts Enjoy double extruder workflow satisfaction Music by: Gibran Alcocer - Idea 1 - piano c...
Advertising