Check pricing on the DSMX version here:
Check pricing on the FRSKY version here:
Follow on Facebook:
I ended up getting this charger as well:
Unboxing and flights of this awesome quad, I love it, the old brushed whoops were underpowered, this one is so fun! I recommend it! Check the links above to see about getting one yourself!
Video of it flying @3:00
FPV footage @5:40
Main Features:
● Multi-flight modes to choose: macro / AIR / ANGLE
● Powerful brushless motor and ESC
● CNC aluminum alloy propeller guard
● BetaFlight OSD to get RSSI, voltage and other information from your goggles
● Use OSD to adjust the flight controller settings and the PID
● The Frsky version supports both EU LBT and NON-EU Frsky transmitter
● Full telemetry function ready
● Head lights ready
● Adjustable camera angle
● Real Bind and Fly version
Specifications:
Wheelbase: 75mm
Propeller: 40mm 3 - blade propeller ( 4 CW + 4 CCW )
Crazybee F3 Flight Controller
Firmware: Crazybee BetaFlight 3.3.0
MCU: STM32F303CCT6 ( 72MHz, 256K flash )
Sensor: MPU6000 ( SPI connection )
Power supply: 1S battery input ( DC 3.5 - 4.35V )
Built-in 5A BLHeli - S 4-in-1 ESC Dshot600 ready
Built-in BetaFlight OSD ( SPI control )
Built-in current meter ( max 14A, could be modified to 28A by replace resistor )
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHeli - S pass-through ready
Board size: 28.5 x 28.5mm
Board weight: 3.5g
Heading LED ready
Onboard 5A 4-in-1 ESC
Power supply: 1S LiPo / LiPo HV ( 4.2V / 4.35V )
Continuous current: 5A
Peak current: 6A ( 3 seconds )
BLHeli suite programmable
Factory firmware: O-L-5-REV16 - 6.HEX
Motor connector: JST PH1.25 3pin
Signal support: DShot150 / DShot300 / DShot600 / Oneshot125 / Multishot / PWM
Onboard Frsky Receiver Version ( Optional )
Compatible with both of Non EU and EU LBT transmitters
Channels: 8CH
Failsafe support: yes
No ground interference: 300m ( transmitter and receiver 1m from the ground )
Flysky Receiver Version ( Optional )
Protocol: AFHDS and AFHDS - 2A switchable
Channels: 8CH ( AFHDS ) or 14ch ( AFHDS - 2A )
No ground interference: 300m ( transmitter and receiver 1m from the ground)
Failsafe support: yes
Video Transmitter:
Output power: 25mW
Frequency: 48CH
With raceband: 5474 - 5945MHz
Input voltage: 3.3 - 5.5V
Current consumption: 300mA
700TVL Camera
Field of view: 120-degree
Video format: NTSC
Antenna: RG178 antenna
Size: 13.9 x 12.0mm ( L x W )
Weight: 3g
Specification
General
Type: Frame Kit
Version: BNF
Motor
Model: SE0703
Motor Type: Brushless Motor
KV: 19000KV
Stator Length: 3mm
Configuration: 9N12P
Flight Controller
Flight Controller Type: F3
Camera
Camera Pixels: 700TVL
Video Standards: NTSC
Battery
Battery (mAh): 450mAh
Battery Coulomb: 30C
Flying Time: 5-7mins
Charging Time.: about 30 mins
Dimension and Weight
Product weight: 0.0418 kg
Package weight: 0.0900 kg
Product size (L x W x H): 9.85 x 9.85 x 3.60 cm / 3.88 x 3.88 x 1.42 inches
Package size (L x W x H): 14.00 x 14.00 x 6.00 cm / 5.51 x 5.51 x 2.36 inches
Package Contents
Package Contents: 1 x RC Drone, 1 x Battery, 1 x Receiver