Deltawing BlitzRCWorks | Flight Review & Build Tips | EDF Fighter Jet | RCINFORMER
Order now at:
Thanks to Richard/RCInformer for the review with very detailed tips of the BlitzRCWorks 50MM DeltaWing EDF jet. It features a BS2X 2-Axis Gyro stabilizer, reinforced inlet lip to aid in overall durability, and plastic wing tip guards, all based on rigorous testing and pilot feedback to protect key areas of the airframe most prone to stress and impact. We're really excited about this aircraft, and hope you will enjoy it as much as we did designing and flying it!
Thanks to Richard/RCInformer for the review with very detailed tips of the BlitzRCWorks 50MM DeltaWing EDF jet. It features a BS2X 2-Axis Gyro stabilizer, reinforced inlet lip to aid in overall durability, and plastic wing tip guards, all based on rigorous testing and pilot feedback to protect key areas of the airframe most prone to stress and impact. We're really excited about this aircraft, and hope you will enjoy it as much as we did designing and flying it!
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Watch more videos
-
Deathstroke 3d printed wearable mask #shorts
Deathstroke 3d printed wearable mask with X1C BambuLab #shorts #3dprinting #deathstroke #bamb... -
DeathStroke BambuLab X1C #Shorts
#shorts DeathStoke wearable mask made with BambuLab X1C #3dprinting -
Enduro Rally 2021 - Pabradė military base
Had a wonderful opportunity to be in a very dirty place on a badly rainy morning but with great a...
Advertising