Extreme Testing - Foxeer ClearTX 2 Flight Review!!! (01.03.2019)
Extreme Testing - Foxeer ClearTX 2 Flight Review - The new Foxeer ClearTX 2 adds some new features like smart audio, has more power options 25mw,200mw, 500mw and max power to 800mW
The Foxeer ClearTX 2 has a ramp up feature where power increases for the first 10 seconds the vtx is powered on to avoid interference with nearby pilots when you power up your drone. The Foxeer ClearTX 2 is better cponfigured to handle near by signal interference and locks those frequencies out as it locks on to you selected frequency.
This video features more extreme testing as for distance and multipath environments. Normally for racing in MultiGP or similiar leagues, it performs very well against the competition in that environment.
Upgrade Version: This Foxeer ClearTX2 is updated based on the former Foxeer ClearTX. Added Remote control function: Setup through Betaflight by connecting Uart port to FC
Strong Anti-Interference Function: Amazingly clean filtering,great interference rejection ability and RF design enable 8 pilots racing simultaneously,no ripple even at full throttle. Long transmission distance and stable performace
Accurate Frequency Locking: Optimized algorithm effectively enhance frequency locking ability, refuse frequency drift, minimize adjacent channel interference
Drive 500mA Load: Stable 5v power output, 5A@500mA, better adapts to the camera with power requirements, can drive larger loads
Factory Mode & Safe Switch: You can adjust power to any level after entering Factory Mode. While powering on or switching channels, power slow ramps up at first 10s prevent causing interference
Foxeer Link:
Amazon:
Specification:
Brand: Foxeer
Size: 22mmx32mm
Connector: MMCX
Display: 9LED
Weight: 6.3g
Power: 25/200/500/800mW
Input: 2~6S
Output: 5v
Channel: 48CH including raceband
Remote control: Uart
Features:
-Accurate frequency locking
Optimized algorithm effectively enhance frequency locking ability,refuse freqency drift,minimize adjacent channel interference.
-interference free
Excellent power solution and RF design enable 8 pilots racing simultaneously,no ripple even at full throttle.
-Remote control
Setup VTx through Betaflight by connecting Uart port to FC.
-Drive 500mA Load
Stable 5v power output,5v@500mA,better adapts to the camera with power requirements,can drive large loads.
-Factory Mode
You can adjust power to any level after entering Factory Mode.
-Safe Switch
While powering on or switching channels,power slow ramps up at first 10sec to prevent causing interference.
Package included:
1 x Foxeer ClearTX 2 5.8G 48CH Remote Control VTx FPV Transmitter International Version
Note: not include the antenna
Pappo links: /
:Pappo Youtube:
#Foxeer #ClearTX2 #FPVVTX #FPVRacing #FPVFreestyle #FPVDrone
My Links
Please Subscribe!
Checkout my Amazon Store:
Join Fullscreen, INC the best Youtube MCN
My Instagram: /
MyTwitter:
Add me on Google+:
My Youtube Channel:
The Foxeer ClearTX 2 has a ramp up feature where power increases for the first 10 seconds the vtx is powered on to avoid interference with nearby pilots when you power up your drone. The Foxeer ClearTX 2 is better cponfigured to handle near by signal interference and locks those frequencies out as it locks on to you selected frequency.
This video features more extreme testing as for distance and multipath environments. Normally for racing in MultiGP or similiar leagues, it performs very well against the competition in that environment.
Upgrade Version: This Foxeer ClearTX2 is updated based on the former Foxeer ClearTX. Added Remote control function: Setup through Betaflight by connecting Uart port to FC
Strong Anti-Interference Function: Amazingly clean filtering,great interference rejection ability and RF design enable 8 pilots racing simultaneously,no ripple even at full throttle. Long transmission distance and stable performace
Accurate Frequency Locking: Optimized algorithm effectively enhance frequency locking ability, refuse frequency drift, minimize adjacent channel interference
Drive 500mA Load: Stable 5v power output, 5A@500mA, better adapts to the camera with power requirements, can drive larger loads
Factory Mode & Safe Switch: You can adjust power to any level after entering Factory Mode. While powering on or switching channels, power slow ramps up at first 10s prevent causing interference
Foxeer Link:
Amazon:
Specification:
Brand: Foxeer
Size: 22mmx32mm
Connector: MMCX
Display: 9LED
Weight: 6.3g
Power: 25/200/500/800mW
Input: 2~6S
Output: 5v
Channel: 48CH including raceband
Remote control: Uart
Features:
-Accurate frequency locking
Optimized algorithm effectively enhance frequency locking ability,refuse freqency drift,minimize adjacent channel interference.
-interference free
Excellent power solution and RF design enable 8 pilots racing simultaneously,no ripple even at full throttle.
-Remote control
Setup VTx through Betaflight by connecting Uart port to FC.
-Drive 500mA Load
Stable 5v power output,5v@500mA,better adapts to the camera with power requirements,can drive large loads.
-Factory Mode
You can adjust power to any level after entering Factory Mode.
-Safe Switch
While powering on or switching channels,power slow ramps up at first 10sec to prevent causing interference.
Package included:
1 x Foxeer ClearTX 2 5.8G 48CH Remote Control VTx FPV Transmitter International Version
Note: not include the antenna
Pappo links: /
:Pappo Youtube:
#Foxeer #ClearTX2 #FPVVTX #FPVRacing #FPVFreestyle #FPVDrone
My Links
Please Subscribe!
Checkout my Amazon Store:
Join Fullscreen, INC the best Youtube MCN
My Instagram: /
MyTwitter:
Add me on Google+:
My Youtube Channel:
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising