Naze32/Flip32 Quick Tip - Re-adding and setting up GPS in Cleanflight V1.8.0
To watch the original GPS setup video for the Naze32/Flip32 then click here –
In this Quick Tip we cover what you need to setup and change in the latest version of the firmware (1.8.0) and GUI (0.63) of Cleanflight to get the GPS to work again.
As in the original video you need to configure the UART2 port in the ‘Ports’ tab first then turn on the GPS features in the ‘Configuration’ tab.
I hope this helps those of you who are stuck as Cleanflight forces you to upgrade your firmware on the board even if you don’t want to.
Thanks for watching. Please LIKE and SUBSCRIBE.
Happy flying!
In this Quick Tip we cover what you need to setup and change in the latest version of the firmware (1.8.0) and GUI (0.63) of Cleanflight to get the GPS to work again.
As in the original video you need to configure the UART2 port in the ‘Ports’ tab first then turn on the GPS features in the ‘Configuration’ tab.
I hope this helps those of you who are stuck as Cleanflight forces you to upgrade your firmware on the board even if you don’t want to.
Thanks for watching. Please LIKE and SUBSCRIBE.
Happy flying!
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising