QAV500 FPV - A Quick Peek
QAV500 FPV - Mini Review
I'm super pumped about the QAV500. Although I still really enjoy my DJI Phantom, this baby is in a whole other league. I did a lot of research and picked the brain of my friend Cedric to make sure I didn't make a lot of expensive mistakes when selecting all the components. I'm sure you could spend more on some of the components but so far, everything about this quad has exceeded my expectations, especially the way it flies.
Some excellent quad FPV pilots (Ronin and Steve the Quad Father) recommended that I get the QAV400 because it is smaller, more agile and more like a sports car than the QAV500 which is more like a limo. When I get super comfortable flying quads, I'll add a QAV400 to the hangar so that I can race around with the boys (I hope).
So far, I've had the quad out 800 meters with absolutely no loss or degradation of video signal and I'm starting to slowly stretch out the distance as I get more comfortable flying it and learning how far to push the battery and flight times. With the Futaba 2.4 system, I won't be pushing it much past 1 kilometer just to be 100% safe. Currently, I have my timer set for 10 minutes and I come down with power in reserve. If I want to go further than that, I will reply on the FPV plane that I'll be building next.
I'll try to get a bit of video with the quad without boring you to death.
Thanks as always for watching and happy flying!
Cheers,
Bob
List of goodies:
QAV500 FPV Quadcopter Frame with Aluminum Arms
Carbon-Fiber Landing Gear for QAV400 & QAV500 Aluminum Arms
Motors: FM4006-13 740kv
ESC's (x4): Lumenier 30 amp ESC with SimonK Firmware
Props: Graupner E-Prop 10x5
Graupner E-Prop 10x5L Pusher
Flight controller: DJI Naza M V2 Multi-Rotor Stabilization Controller and GPS/Compass
OSD: DJI iOSD Mini - OSD for Naza and Wookong
FPV Video Transmitter: Immersion RC 600mW 5.8GHz A/V Transmitter
FPV Video Receiver: Immersion RC Uno 5.8Ghz V2 Receiver
FPV Antennas: SpiroNet 5.8Ghz V2 Antenna Set
SMA Right Angle Adapter
Carbon Fiber Tubes for longer legs:
(Now also available from GetFPV.com)
DJI Zenmuse H3-2D 2-axis GoPro Gimbal Camera Mount
Receiver: Futaba R6202SBW 3/18 Channel 2.4GHz FASST High Voltage Micro S.Bus er
Low Voltage Alarm:
Batteries: Turnigy nano-tech 5000mah 4S 35~70C Lipo Pack
Music:
The Royalty Free Music is from Jamendo at: www.jamendo.com
Artist: Zeropage
Name of Album: Ambient Pills
Song Title: Ambient Voyager
Link to Song:
Creative Commons License BY-SA 3.0
Permission to share, adapt and make commercial use of the work under the condition of Attribution.
Link to Creative Commons License: /
I'm super pumped about the QAV500. Although I still really enjoy my DJI Phantom, this baby is in a whole other league. I did a lot of research and picked the brain of my friend Cedric to make sure I didn't make a lot of expensive mistakes when selecting all the components. I'm sure you could spend more on some of the components but so far, everything about this quad has exceeded my expectations, especially the way it flies.
Some excellent quad FPV pilots (Ronin and Steve the Quad Father) recommended that I get the QAV400 because it is smaller, more agile and more like a sports car than the QAV500 which is more like a limo. When I get super comfortable flying quads, I'll add a QAV400 to the hangar so that I can race around with the boys (I hope).
So far, I've had the quad out 800 meters with absolutely no loss or degradation of video signal and I'm starting to slowly stretch out the distance as I get more comfortable flying it and learning how far to push the battery and flight times. With the Futaba 2.4 system, I won't be pushing it much past 1 kilometer just to be 100% safe. Currently, I have my timer set for 10 minutes and I come down with power in reserve. If I want to go further than that, I will reply on the FPV plane that I'll be building next.
I'll try to get a bit of video with the quad without boring you to death.
Thanks as always for watching and happy flying!
Cheers,
Bob
List of goodies:
QAV500 FPV Quadcopter Frame with Aluminum Arms
Carbon-Fiber Landing Gear for QAV400 & QAV500 Aluminum Arms
Motors: FM4006-13 740kv
ESC's (x4): Lumenier 30 amp ESC with SimonK Firmware
Props: Graupner E-Prop 10x5
Graupner E-Prop 10x5L Pusher
Flight controller: DJI Naza M V2 Multi-Rotor Stabilization Controller and GPS/Compass
OSD: DJI iOSD Mini - OSD for Naza and Wookong
FPV Video Transmitter: Immersion RC 600mW 5.8GHz A/V Transmitter
FPV Video Receiver: Immersion RC Uno 5.8Ghz V2 Receiver
FPV Antennas: SpiroNet 5.8Ghz V2 Antenna Set
SMA Right Angle Adapter
Carbon Fiber Tubes for longer legs:
(Now also available from GetFPV.com)
DJI Zenmuse H3-2D 2-axis GoPro Gimbal Camera Mount
Receiver: Futaba R6202SBW 3/18 Channel 2.4GHz FASST High Voltage Micro S.Bus er
Low Voltage Alarm:
Batteries: Turnigy nano-tech 5000mah 4S 35~70C Lipo Pack
Music:
The Royalty Free Music is from Jamendo at: www.jamendo.com
Artist: Zeropage
Name of Album: Ambient Pills
Song Title: Ambient Voyager
Link to Song:
Creative Commons License BY-SA 3.0
Permission to share, adapt and make commercial use of the work under the condition of Attribution.
Link to Creative Commons License: /
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising